Burp Suite Tutorial - Web Application Penetration Testing

Burp Suite Tutorial – Web Application Penetration Testing (Part 1)

Burp Suite from Portswigger is one of my favorite tools to use when performing a Web Penetration Test. The following is a step-by-step Burp Suite Tutorial. I will demonstrate how to properly configure and utilize many of Burp Suite’s features. After reading this, you should be able to perform a thorough web penetration test. This will be the first in a two-part article series.

What we will cover:

  • Outbound SOCKS Proxy Configuration
  •  Intercept & Scope Configuration
  • Manual Application Walkthrough
  • Using The Spider & Discover
  • Using The Repeater Tab
  • Using The Intruder Tab
  • Text Specific Searching
  • Using The Automated Scanner

Disclaimer: Testing web applications that you do not have written authorization to test is illegal and punishable by law. 

Configure Outbound SOCKS Proxy – Burp Suite Tutorial

Depending on the scope of your engagement, it may be necessary to tunnel your Burp Suite traffic through an outbound SOCKS Proxy. This ensures that testing traffic originates from your approved testing environment.  I prefer to use a simple SSH connection which works nicely for this purpose. SSH out to your testing server and setup a SOCKS Proxy on your localhost via the ‘–D’ option like this.

ssh –D 9292 –l username servername

Navigate to the Options tab located near the far right of the top menu in Burp Suite.  From the “Connections” sub-tab, Scroll down to the third section labeled “SOCKS Proxy”.  Type in localhost for the host option and 9292 for the port option.

Burp Suite Tutorial - SOCKS Proxy Settings

Now Burp Suite is configured to route traffic through your outbound SSH tunnel. Configure your browser’s proxy settings to use Burp Suite. Navigate to www.whatismyip.com and ensure your IP address is coming from your testing environment.

#ProTip I use a separate browser for web application testing.  This ensures I don’t accidentally pass any personal data to one of my client’s sites such as the password to my gmail account for example.

I also prefer to use a proxy switching addon such as “SwitchySharp” for Google Chrome. This allows me to easily switch back-and-forth between various proxy configurations that I might need during different engagements. Here is what my configuration settings look like for Burp Suite.

Burp Suite Tutorial - SwitchySharp Proxy Settings

Configure Intercept Behavior – Burp Suite Tutorial

The next thing I do is configure the proxy intercept feature. Set it to only pause on requests and responses to and from the target site.  Navigate to the “Proxy” tab under the “Options” sub-tab. The second and third headings display the configurable options for intercepting requests and responses. Uncheck the Burp Suite defaults and check “URL Is in target scope”.  Next turn intercept off as it is not needed for the initial application walkthrough. From the “Intercept” sub-tab ensure that the toggle button reads “Intercept is off”

Burp Suite Tutorial - Proxy Intercept Settings


Application Walkthrough – Burp Suite Tutorial

For some reason, a lot of people like to skip this step. I don’t recommend this. During the initial walkthrough of your target application it is important to manually click through as much of the site as possible.  Try and resist the urge to start analyzing things in Burp Suite right a way. Instead, spend a good while and click on every link and view every page. Just like a normal user might do. Think about how the site works or how it’s “supposed” to work.

You should be thinking about the following questions:

  • What types of actions can someone do, both from an authenticated and unauthenticated perspective?
  • Do any requests appear to be processed by a server-side job or database operation?
  • Is there any information being displayed that I can control

If you stumble upon any input forms, be sure to do some manual test cases. Entering a single tick and hit submit on any Search form or zip code field you come across. You might be surprised at how often security vulnerabilities are discovered by curious exploration and not by automated scanning.

Configure Your Target Scope – Burp Suite Tutorial

Now that you have a good feel for how your target application works its time to start analyzing some GETs and Posts. However, before doing any testing with Burp Suite it’s a good idea to properly define your target scope.  This will ensure that you don’t send any potentially malicious traffic to websites that you are not authorized to test.

#ProTip I am authorized to test www.pentestgeek.com. *You* are not.

Head over to the “Target” tab and then the “Site map” sub-tab.  Select your target website from the left display pane.  Right click and choose “Add to scope’.  Next highlight all other sites in the display pane, right click and select Remove from scope.  If you’ve done this correctly your Burp Suite scope tab should look something like the image below.

Burp Suite Tutorial - Scope Settings

Initial Pilfering – Burp Suite Tutorial

Click on the “Target” tab and the “Site Map” sub tab.  Scroll down to the appropriate site branch and expand all the arrows until you get a complete picture of your target site.  This should include all of the individual pages you browsed as well as any javascript and css files. Take a moment to soak all of this in, try and spot files that you don’t recognize from the manual walkthrough.  You can use Burp Suite to view the response of each request in a number of different formats located on the “Resposne” tab of the bottom right display pane. Browse through each respond searching for interesting gems. Things you might be surprised to find include:

  • Developer comments
  • Email addresses
  • Usernames & passwords if you’re lucky
  • Path disclosure to other files/directories
  • Etc…


Search Specific Keywords – Burp Suite Tutorial

You can also leverage Burp Suite to do some of the heavy lifting for you. Right click on a node, from the “Engagement tools” sub-menu select “Search”. One of my favorite searches is to scan for the string “set-cookie”. This lets you know which pages are interesting enough to require a unique cookie. Cookies are commonly used by web application developers to differentiate between requests from multiple site users. This ensures that user ‘A’ doesn’t get to view the information belonging to user ‘B’. For this reason it is a good idea to identify these pages and pay special attention to them.

Burp Suite Tutorial - Search Specific Keywords

Using Spider and Discover – Burp Suite Tutorial

After a good bit of manual poking and prodding it’s usually beneficial to allow Burp Suite to spider the host.  Just right click on the target’s root branch in the sitemap and select “Spider this host”.

Burp Suite Tutorial - Spider Feature

Once the spider has finished, go back to your site-map and see if you picked up any new pages.  If you have, take a manual look at them in your browser and also within Burp Suite to see if they produce anything interesting.  Are there any new login prompts, or input boxes for example? If you’re still not satisfied with all that you have found you can try Burp Suite’s discovery module.  Right click on the target site’s root branch and from the “Engagement tools” sub-menu select “Discover Content”.  On most sites this module can and will run for a long time so it’s a good practice to keep an eye on it. Make sure that it completes or shut it off manually before it runs for too long.


Using The Repeater – Burp Suite Tutorial

The Repeater tab is arguably one of the most useful features in Burp Suite. I use it hundreds of times on every web application that I test. It is extremely valuable and also incredibly simple to use. Just right click on any request within the “Target” or “Proxy” tab and select “Send to Repeater”. Next click over to the “Repeater” tab and hit “Go”. You will see something like this.

Burp Suite Tutorial - The Repeater

Here you can use burp suite to manipulate any part of the HTTP request headers and see what the response looks like. I recommend spending some good time here playing with every aspect of the HTTP request. Especial any GET/POST parameters that are besting sent along with the request.

Using The Intruder – Burp Suite Tutorial

If you are limited on time and have too many requests and individual parameters to do a thorough manual test. The Burp Suite Intruder is a really great and powerful way to perform automated and semi-targeted fuzzing. You can use it against one or more parameters in an HTTP request. Right click on any request just as we did before and this time select “Send to Intruder”. Head over to the “Intruder” tab and click on the “Positions” sub-tab. You should see something like this.

Burp Suite Tutorial - Intruder Positions

I recommend using the “Clear” button to remove what is selected at first. The default behavior is to test everything with an ‘=’ sign. Highlight the parameters you wan’t to fuzz and click “Add”. Next you need to go to the “Payloads” sub-tab and tell Burp Suite which test cases to perform during the fuzzing run. A good one to start off with is “Fuzzing – full”. this will send a number of basic test cases to every parameter that you highlighted on the “Positions” sub-tab.

Burp Suite Tutorial - Intruder Payloads

Automated Scanning – Burp Suite Tutorial

The last thing that I do when testing a web application is perform an automated scan using Burp Suite. Back on your “Site map” sub-tab, right click on the root branch of your target site and select “Passively scan this host”. This will analyze every request and response that you have generated during your Burp Suite session. It will produce a vulnerability advisor on the “Results” sub-tab located on the “Scanner” tab. I like to do the passive scan first because it doesn’t send any traffic to the target server. Alternatively you can configure Burp Suite to passively analyze requests and responses automatically in the “Live scanning” sub-tab. You can also do this for Active Scanning but I do not recommend it.

When doing an active scan I like to use the following settings.

Burp Suite Tutorial - Active Scan Settings

End Of Part1 – Burp Suite Tutorial

Hopefully you’ve learned some useful techniques for performing Web Penetration Testing. In Part 2, we will go over some more of Burp Suite’s features. We will cover reporting and exporting session data for collaboration with other pentesters. I look forward to seeing you there. Thank you for reading and as always, Hack responsibly.

Recommended Reading

I highly recommend you purchase The Web Application Hacker’s Handbook. This book covers every aspect of Burp Suite in much greater detail than this tutorial and should be considered an absolute MUST READ for any professional that is serious about Web Penetration Testing and ethical hacking.

As a reminder, Pentest Geek will receive a small commission if you purchase any of these titles by following the affiliate links on this page. Some additional titles you might consider include but are definitely not limited to:

Share this article

  • WHAT IS BURP SUITE Burp Suite is a Java-based web penetration testing framework. It has become an industry standard suite of tools used by information security professionals. Burp Suite helps you identify vulnerabilities and verify attack vectors that are affecting Read more

  • The Burp Suite is tightly a combination of open tools that allow efficient security testing of modern-day Web Applications.

    It provides a comprehensive combination of tools that allow you to automate and manual workflows to test, estimate and attack Web Applications of all aspects and areas.


  • great jobe , thank’s man

  • Great job in putting these instructions together, and hope to see the material grow in size and variety in days to come.

  • Did they change the burp interface? I can’t see the tabs/subtabs you mentioned in this article on my burp interface.

  • I also wrote an article about using Burp Proxy that you may like. Here it is: Web app pentest – testing for account enumeration (OTG-IDENT-004)

  • How to intercept cookies received from response and change the cookie values ,So that the new cookies value is sent in the subsequent request.

    i tried updating cookie jar…but still not working

  • Excellent walkthrough / tutorial. I am hoping to expand on it and would like to collaborate if you have interest. One of the things I want to expand on is Burp Suite reporting and using it to write security assessment reports for C-level managers.

  • It’s been a while since I’ve seen a solid Burp tutorial. I love the fact that you added the SOCKS bit. Great job, looking forward to part 2!

  • Thanks Nasar, I appreciate your patience. I should have it finished soon. Keep checking back! Or subscribe to our RSS feed :)

  • waiting fot the second tutorial.. when will it be available

  • good tut..

  • Thank you Asim! I appreciate the great feedback. Part #2 is still on the way, thanks for reading!

  • a very good and well organized post, waiting to read the next part.

    thumb sup

  • Leave a Reply

    Your email address will not be published. Required fields are marked *

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Share This

    Recent Posts

    Subscribe To Our Mailing List

    The Ultimate Burp Suite Training Program

    Learn Network Penetration Testing

    Penetration Testing



    Web Application Hacking

    Copyright 2024


    FREE Burp Suite Training

    Take your web hacking skills to the next level.  Download a pre-configured virtual lab and start learning Burp Suite today!

    You have Successfully Subscribed!